Skip to main content
Caesarstone AuthorizedTSSA$5M Liability
Etobicoke Kingsway kitchen with white quartz countertops and a seating island
Serving Etobicoke: The Kingsway, Humber Bay Shores, Mimico 2-3 Wk Install15-Yr Workmanship WarrantyCaesarstone + Cambria Authorized

Quartz Countertops Etobicoke, ON | Caesarstone + Cambria Fab + Install

Quartz countertops in Etobicoke cover two very different building types: Humber Bay Shores and Mimico condo towers along the lake, and original 1950s kitchens in The Kingsway, Islington Village and Markland Wood.

$65-$180 per sqft installed, same price across the GTA
  • Proliner laser templating to 1/16 in
  • In-house CNC in our 20,000 sqft shop
  • 25/50/25 payment, no consultation fee
  • $5M liability, WSIB, TSSA

Kingsway chip repair, resin-matched Caesarstone edge, under an hour, $700 (plus High Park-adjacent Carrara vanity, $1,450)

Fast Turnaround CAD Service

Get a FREE CAD Quote

Tell us about your kitchen, we send a CAD estimate within 1-2 business days.

Strict privacy. Direct Red Seal review. No spam ever.

17+
17+ Yrs Fab
Toronto and GTA
1.8K
1,800+ Kitchens
400+ bathrooms too
CS
Caesarstone Authorized
Cambria since 2010
15Y
15-Yr Warranty
Transferable 5 yrs
$5M
$5M Liability
TSSA + NSF installs
WSIB
WSIB Covered
Certificates on request

Serving The Kingsway, Humber Bay Shores, Mimico and More

Etobicoke quartz countertops cover two building types: Humber Bay Shores towers where slabs ride the freight elevator, and Kingsway and Islington homes with original 1950s kitchens. Crews route via the Gardiner. Lakeshore towers date from the late 1990s on, and The Kingsway was laid out by Robert Home Smith from the early 1900s.

CAD quote in 1-2 business days; 2-3 wk install. Same published per-sqft pricing as everywhere else we work, with a 25/50/25 payment schedule and a 15-year transferable workmanship warranty.

Neighbourhoods we serve

  • The Kingsway
  • Humber Bay Shores
  • Mimico
  • Islington Village
  • Long Branch
  • Markland Wood

Postal codes we cover: M8X, M8V, M8Y, M8W, M9A, M9C

Main routes and landmarks

  • Gardiner Expressway
  • Lake Shore Boulevard
  • Bloor West
  • Humber Bay Park
  • Sherway Gardens
Humber Bay Shores condo kitchen with grey quartz countertops

Etobicoke Countertop Problems: Chipped Condo Edges and Closed-Off Kitchens

Most countertop jobs that need a re-fit fail for a reason that was visible at templating. Here is the one we see most in this part of the GTA, followed by the four that apply everywhere.

Chipped edges on aging Humber Bay Shores condo quartz

A pot or a dropped bottle takes a chip out of the edge beside the sink, and the building makes replacing a full slab a week of paperwork.

Why it happens here: Humber Bay's condo towers have gone up since the late 1990s, so many original builder tops are now 10 to 20 years old, and a new slab means booking the freight elevator again.

How we fix it: Quartz chip repair is done on site: we match resin to the colour, fill and polish flush, and only quote a replacement when a crack runs through the piece.

1. Seam placement

Seams dropped over the dishwasher or mid sink run open as the cabinet moves. They belong behind the range or at the island edge, marked at templating.

How we place seams

2. Overhang blow-out

Quartz cantilevered past 12 inches without steel cracks under weight. Any overhang over 10 inches gets brackets recessed into the cabinet rail.

Our bracket rule

3. Mitred edge lippage

Hand-cut 45-degree waterfall mitres leave a lip that catches dust. We machine every mitre on a CNC profiler so the vein wraps cleanly.

CNC edges and mitres

4. Pre-cabinet templating

Templates taken before cabinets are set do not fit once walls and layouts shift. We template only after final cabinet install.

Templating checklist

How It Works From Templating to Install

Payments are tied to measurable work: 25% at templating, 50% at fabrication start and the balance after your walk-through.

  1. 1

    Slab selection

    Week 1

    Sample box with the top Caesarstone, Cambria and Hanstone colours, or a slab yard visit. Your slab is tagged.

  2. 2

    Proliner laser templating

    Week 2, 25% due

    After cabinet install. Seams, overhangs, brackets, cutouts and delivery access marked and signed off.

  3. 3

    In-house CNC fabrication

    Days 7-10, 50% due

    CNC bridge saws, waterjet and edge profilers in our 20,000 sqft shop. Red Seal inspection.

  4. 4

    Install day

    Balance due

    Removal, setting, seams, plumbing reconnection and a walk-through before final payment.

Repair or Replace? Get a Straight Answer

No consultation deposit. Per-sqft pricing before you pay anything, 25/50/25 payments tied to measurable work and a 15-year transferable workmanship warranty.

Why The Kingsway and Humber Bay Choose Us

  • Freight elevator and certificate logistics for Humber Bay Shores towers
  • Kingsway and Islington kitchen renovations with bracketed islands
  • On-site resin-matched chip repair, often under an hour
  • Gardiner and 427 routing for on-time arrivals
  • Honest repair-or-replace advice before you spend
  • Same published per-sqft pricing as downtown

Lakeshore Towers and Kingsway Classics

Gardiner, 427 and Lake Shore Routing

Etobicoke is a straight run west along the Gardiner Expressway, with Highway 427 covering the northern pockets like Markland Wood. Lake Shore Boulevard takes us to Mimico, Long Branch and the Humber Bay Shores towers.

  • Humber Bay Shores and Mimico towers. Freight elevator bookings, loading dock times and certificates for management are confirmed before install day. Slabs and seams are sized to the elevator cab at templating.
  • The Kingsway and Islington Village. Detached homes off Bloor West with driveway access and older kitchens being opened up.
  • Long Branch and Markland Wood. Bungalows and side-splits where many tops are laminate-to-quartz replacements.

We time install days to avoid the worst of the Gardiner rush, so crews arrive at your start time.

1950s Kingsway Kitchens and New Lakeshore Condos

The Kingsway and Islington Village are full of solid mid-century houses. Their original kitchens are often small and closed off, and renovations tend to remove a wall and add an island. That means new cabinets, a seating overhang and a seam plan that suits a much larger layout. We recess steel for any overhang over 10 inches and keep seams off the dishwasher run.

The Humber Bay Shores towers along the lake are newer condos with compact kitchens and strict building rules. Here the challenge is getting the stone up: we book the freight elevator, protect the corridor and plan seams that fit the cab without landing in an obvious spot.

Etobicoke also gives us a lot of repair work. Kevin M. in The Kingsway knocked a chip out of his Caesarstone edge beside the sink. We matched resin to the colour on site and polished it flush in under an hour for $700. Not every problem needs a new countertop, and we will tell you when a repair is enough.

For homes on the High Park side of Etobicoke, marble vanities are a popular powder room upgrade. Our Carrara powder room vanity nearby, with a tricky inside-corner template, was $1,450.

Kingsway chip repair, resin-matched Caesarstone edge, under an hour, $700 (plus High Park-adjacent Carrara vanity, $1,450)

See all GTA projects

What Our Customers Say

"A pot slipped and took a chip out of our Caesarstone edge right by the sink. They came out to our Kingsway house, matched the resin to the colour and polished it flush. Under an hour and $700. You honestly cannot find the spot now."
Kevin M.| Etobicoke (The Kingsway)
"Carrara marble vanity in our High Park powder room. Complicated inside-corner template, nailed it first fit."
Sarah K.| High Park
"Caesarstone 5141 Frosty Carrina on our Lawrence Park kitchen island looks exactly like the showroom sample. Seam behind the range is invisible."
Alex T.| Lawrence Park

Reviews supplied by clients and shared with permission. First names and neighbourhoods only.

Our Service Area on the Map

Open in Google Maps

Etobicoke Countertop Questions Answered

Will a Kingsway or Mimico install take more than a day?

Rarely. Our crews travel the Gardiner or Highway 427, arrive at your start time and finish most Etobicoke kitchens the same day.

Do you work in Humber Bay Shores condos?

Yes. Many towers there have gone up since the late 1990s, so we know the drill: we book the freight elevator through management, size slabs to fit the cab and supply WSIB and $5M liability certificates ahead of time.

Can you repair a chipped quartz countertop in Etobicoke?

Yes. Kevin M. in The Kingsway had a Caesarstone edge chip resin-matched and polished on site in under an hour for $700.

Is quartz priced higher west of the Humber River?

No. Etobicoke pays exactly what downtown pays: $65-$120/sqft for standard quartz and $110-$180/sqft for Caesarstone or Cambria, installed.

Can you add an island to a 1950s Kingsway kitchen?

Yes. Once the new cabinets are in, we template the island, add steel for any overhang past 10 inches and plan seams for the larger layout.

Do you serve Long Branch and Islington Village?

Yes, along with Mimico, Markland Wood and the rest of Etobicoke.

Should I repair or replace an old Etobicoke countertop?

Repair if it is a chip, a failed seam or a dropped sink and the rest is sound. Replace if a crack runs through a section or you want a new material.

CAD estimate within 1-2 business days

Start Your Etobicoke CAD Quote

CAD estimate within 1-2 business days. No consultation deposit.

  • Per-sqft pricing before deposit
  • 25/50/25 payment
  • 15-yr transferable warranty
(416) 000-0000Get Free CAD Quote